erformance characteristic:

1. The soldering tin rifle adopts the light and handy organization to design; it is more relaxed to work.

2.      Generate heat core while being high-quality, have longer working lives.

3.      It is simple to operate. It is apt to finish welding the homework.

4.      Amount uses the diameter as the tin thread of 0.8.3mm.

5.      Use voltage of 110 VAC or 220 VAC

Operation method

1.      When the hand welding torch is used for the first time, must preheat for several minutes, phenomena are to belong to the normal one to smolder, will disappear in several seconds.

2.Insert the specified tin mouth from entering of tin line, then pull the trigger according to the arrow point direction, can work normally until the tin silk sends and leads the tin to manage the mouth to stop.

3. While needing to withdraw from or change the tin silk while stopping using, so long as extremely stiff the direction will be promoted upwards, will take out the tin silk at the same time.

4. At is it generate heat core to changing, is it pull down to stamp protecting first, is it generate heat core line to disassemble, pull down flatiron chew, can is it generate heat the core to change again.

Precautions

1. While working, the temperature that the flatiron is chewed and the flatiron is in charge of is up to more than 400 degrees, forbid the human body to touch so as not to burn.

2. When the hand welding torch stops using, please put it on its support.

3. Work after finishing, close power, etc. is it put to keep after the complete cooling.